SF assortment 210 stripsItem number: 800525
217 x 32 mm (20x), 217 x 37 mm (20x), 217 x 44 mm (20x), 217 x 49 mm (20x),
217 x 59 mm (20x), 217 x 72 d mm (20x), 217 x 78 d mm (20x),
217 x 90 d mm (20x), 217 x 98 d mm (20x), 217 x 154 d mm (30x)
( d= double-stitched seam (mounts sealed at top and bottom))
Simply the best and safest mount for your stamps.
• SF strips offer maximum protection against sticking, discoloration, dust, and humidity.
• Stamps held securely in place by strong clamp-type seal.
• SF mounts are made from 100% polystyrene (free from softening agents, acids and stabilizing chemicals).
• Anti-reflection coating prevents light interference.
• Special adhesive on reverse side of film (simply moisten and affix).
For most standard sizes. Please note: the size of the mount is cut 4 mm larger than the actual stamp for that nice “centered” look. The sizes listed represent the size of the stamp. You do not need to add extra salvage.
D = Doragard (closed top and bottom, open at back)
d = double seal (closed top and bottom)
LIGHTHOUSE SF strips are 217 mm (8 1/2"") in length, in various heights. Here too, the strip is 4 mm higher than the given stamp size. Cut to the desired width as needed.
The following strip heights are included in the assortment (210 strips in total - 500 grams):
217 x 32 mm (20x)
217 x 37 mm (20x)
217 x 44 mm (20x)
217 x 49 mm (20x)
217 x 59 mm (20x)
217 x 72 d mm (20x)
217 x 78 d mm (20x)
217 x 90 d mm (20x)
217 x 98 d mm (20x)
217 x 154 d mm (30x)